Smart Pointers Gotchas

There are at least several questions about using smart pointers in modern C++11

• Why is auto_ptr deprecated?
• Why does unique_ptr finally work good?
• How to use arrays with unique_ptr?
• Why create shared_ptr with make_shared?
• How to use arrays with shared_ptr?
• How to pass smart pointers to functions?

While learning how to use the new C++ standard I came across several issues with smart pointers. In general you can mess up a lot less using those helper objects and thus you should use them in your code instead of raw pointers. Unfortunately there are some topics you have to understand to take full advantage of them. As in most cases when you get a new tool to solve your problems, this tool introduces another problems as well.

Some predefines

Let us take a simple Test class with one member field to present further concepts:

class Test
{
public:
    Test():m_value(0) { std::cout << "Test::Test" << std::endl; }
    ~Test() { std::cout << "Test::~Test destructor" << std::endl; }

    int m_value;
};

typedef std::auto_ptr<Test>   TestAutoPtr;
typedef std::unique_ptr<Test> TestUniquePtr;
typedef std::shared_ptr<Test> TestSharedPtr;

Why is auto_ptr deprecated?

auto_ptr was one of the first type of smart pointers introduced in C++ (in C++98 to be more precise). It was designed to serve as a simple unique pointer (only one owner, without any reference counter), but people tried to use this also in a form of shared pointer. None of those functionalities were satisfied by auto_ptr's implementation! Quick example below:

void doSomethig(TestAutoPtr myPtr) {
    myPtr->m_value = 11;
}

void AutoPtrTest() {
    TestAutoPtr myTest(new Test());
    doSomethig(myTest);
    myTest->m_value = 10;
}

Try to compile and run this... what happens? It crashes just after we leave the doSomething procedure! We would assume than in doSomething some reference counter for our pointer is incremented, but auto_ptr has no such thing.

The object is destroyed because when we leave doSomething our pointer gets out of scope and it is deleted. To make it work we need to pass a reference to this auto pointer.

Another thing is that we have limited way of deleting more complicated objects, there is no control over it at all, only standard delete can be used here.

Why does unique_ptr finally work good?

Fortunately with the new standard we got a brand new set of smart pointers! When we change auto_ptr to std::unique_ptr<test> in our previous example we will get a compile (not runtime) error saying that we cannot pass a pointer to another function. And this is the proper behaviour.

unique_ptr is correctly implemented because of move semantics basically. We can move (but not copy) ownership from pointer to another. We also need to be aware when and where we pass the ownership. In our example we can use:

doSomethig(std::move(myTest));

to move the pointer's ownership. That way after the function returns our pointer is also not valid, but we did it on purpose after all. Another nice advantage of this type of pointer is that we can use custom deleters. It is useful when we have some complicated resources (files, textures, etc, etc).

How to use arrays with unique_ptr?

First thing to know:

std::unique_ptr<int> p(new int[10]);  // will not work!

The above code will compile, but when resources are about to be deleted only single delete will be called. So how do we ensure that delete[] is called? Fortunately unique pointers have a proper partial specialization for arrays and we can write:

std::unique_ptr<int[]> p(new int[10]);  
p[0] = 10; 

For our particular example:

std::unique_ptr<Test[]> tests(new Test[3]);

And we will get the desired output:

Test::Test
Test::Test
Test::Test
Test::~Test destructor
Test::~Test destructor
Test::~Test destructor

As expected :)

Note that if you want to pass address of the first element, you have to use &(pointerToArray[0]). Writing pointerToArray will not work.

Why create shared_ptr with make_shared?

Unique pointers provide their features only via wise usage of C++ syntax (using private copy constructor, assignment, etc), they do not need any additional memory.  But with shared_ptr we need to associate some reference counter with our object. How to do that efficiently? When we do:

std::shared_ptr<Test> sp(new Test());
std::shared_ptr<Test> sp2 = std::make_shared<Test>();

We will get the output as expected:

Test::Test
Test::Test
Test::~Test destructor
Test::~Test destructor

So what is the difference? Why not use syntax similar to creation of unique_ptr? The answer lies in the allocation process. With the first construct we need to allocate a space for the object and then for the reference counter. With the second construct there is only one allocation (using placement new) and ref counter shares the same memory block as the pointed object.

VS 2012 local's view

Above you can see a picture with local's view in the VS 2012. Compare the addresses of object data and reference counter block. For the sp2 we can see that they are very close to each other.

To be sure I got proper results I've even asked question on stackoverflow: http://stackoverflow.com/questions/14665935/make-shared-evidence-vs-default-construct

How to use arrays with shared_ptr?

Arrays with shared_ptr are a bit trickier that when using unique_ptr, but we can use our own deleter and have full control over them as well:

std::shared_ptr<Test> sp(new Test[2], [](Test *p) { delete [] p; });

We need to use custom deleter (here as a lambda expression). Additionally we cannot use make_shared construction.

Unfortunately using shared pointers for arrays is not so nice. I suggest taking boost instead. For instance: http://www.boost.org/doc/libs/1520/libs/smartptr/sharedarray.htm

How to pass smart pointers to functions?

We should use smart pointers as a first class objects in C++, so in general we should pass them by value to functions. That way reference counter will increase/decrease correctly. But we can use some other constructions which seems to be a bit misleading. Here is some code:

void testSharedFunc(std::shared_ptr<Test> sp) {
    sp->m_value = 10;
}

void testSharedFuncRef(const std::shared_ptr<Test> &sp) {
    sp->m_value = 10;
}

void SharedPtrParamTest() {
    std::shared_ptr<Test> sp = std::make_shared<Test>();

    testSharedFunc(sp);
    testSharedFuncRef(sp);
}

The above code will work as assumed, but in testSharedFuncRef we get no benefit of using shared pointers at all! Only testSharedFunc will increase reference counter.

For some performance critical code we, additionally, need to notice that passing by value will need to copy the whole pointer block, so maybe it is better to use even raw pointer there.

But perhaps the second option (with reference) is better? It depends. The main question is if you want to have full ownership of the object. If not (for instance you have some generic function that calls methods of the object) then we do not need ownership... simple passing by reference is a good and fast method.

It is not only me who got confused. Even Herb Sutter paid some attention to this problem and here is his post on that matter: http://herbsutter.com/2012/06/05/gotw-105-smart-pointers-part-3-difficulty-710/

Some additional comments

Smart pointers are very useful, but we, as users, also need to be smart :) I am not as experienced with smart pointers as I would like to be. For instance sometimes I am tempted to use raw pointers: I know what will happen, and at a time I can guarantee that it will not mess with the memory. Unfortunately this can be a potential problem in the future. When code changes my assumptions can be not valid any more and new bugs may occur. With smart pointers it is not so easy to break things.

All this topic is a bit complicated, but as usually in C++, we get something at a price. We need to know what we are doing to fully utilize the particular feature.

Code for the article: https://github.com/fenbf/review/blob/master/smart_ptr.cpp

Links

• "The C++ Standard Library" Second Edition was main reference for this post.
• http://stackoverflow.com/questions/8114276/how-do-i-pass-a-unique-ptr-argument-to-a-constructor-or-a-function
• http://stackoverflow.com/questions/14027079/stop-heap-allocation-via-make-shared
• http://stackoverflow.com/questions/9302296/is-make-shared-really-more-efficient-than-new
• http://ootips.org/yonat/4dev/smart-pointers.html

This article also is hosted on: www.codeproject.com


Reprinted with permission from Bartłomiej Filipek's blog